Our goal is to deliver the highest levels of Molecular Hydrogen to receiving it's therapeutic effects and begin seeing marginal improvements in our overall health.
To reach these levels we've developed a DuPont Membrane capable of undergoing a process called Electrolysis. Electrolysis is the use of electricity to split water into hydrogen and oxygen. The water inside the tumbler is entering the membrane and H2O molecules are simultaneously being split, you'll notice air bubbles rising within. Hydrogen gas infuses the water to create an anti-oxidant environment. The leftover oxygen is expelled.
The experts have recommended the optimal levels of Molecular Hydrogen to be above 2.0 PPM (Parts Per Million).
Rinse the tumbler each morning. Ensure the glass bottle is tightly sealed to Dupont Membrane.
Fill with good quality drinking water, fill just before the cap. DO NOT fill to the rim, just one finger length below. Seal the cap on tightly.
By pressing the power button once, the indicator light will turn green and the unit will make hydrogen water for 5 minutes. * DO NOT turn on the power supply if there is no water in the bottle.
Once the light turns off the Electrolysis process is complete. You may drink the Hydrogen either from the bottle directly or pour it into another container. Is is best to consume the water within 30 minutes as the hydrogen level will decrease over time, after opening.
If the indicator light turns red before or during the process, this means the battery is low and needs to be charged.
Power
USB 5V / 2.5A
Maximum Output
≤10W
Maximum Volume
250 mL
Water Quality Demand
Drinking Water
Water Temperature
36-140 Degrees
Size
67x295 mm
Net Weight
472 g
Hydrogen Concentration
4.0 PPM (Parts per Million)
Bottle Materials
Glass
DuPont Membrane with Electrolysis plate (x1)
Glass Bottle (x1)
USB charging port (x1)
USB charging cable (x1)
Bottle Cap (x1)
Instruction Manual (x1)
Due to the coronavirus's impact and the mandates in place, your order may experience a shipping delay. This delay is due to several factors, including travel restrictions, available staffing, and/or federal/state/local mandates.
Standard Shipping is 3-5 days with an additional 1-2 days for processing.
If you are experiencing delays with your shipment, please contact us @support@h2codeusa.com.
Daily Cleaning
To clean the tumbler, fill the bottle with clean water. Press and hold the power button for 5 seconds. The indicator light will turn purple and there will be a beep sound at which time the cleaning function will start. After cleaning for 3 minutes, the cleaning will be completed and the indicator light will go out. Discard the water. The water from the cleaning function has no hydrogen, but only produces oxygen for cleaning.
Periodic Cleaning
About twice a month, use warm water to clean the electrolysis electrodes. Fill the Glass Bottle half full with warm water and let stand 1-2 hours. Shake several times and discard water and remove any debris.
*DO NOT cleanse the cup with detergents or volatile solvents
Odor Treatment
After prolonged use there may be an odor. Please use ≈ 60°C (140°F) water and soak for 5 minutes.
Temperature Control
DO NOT pour boiling water into the Bottle (heat resistant temperature is ≈60 °C/140°F ).
Keep the unit away from freezing. (i.e. 0°C/32°F)
Battery & Charger
Connect the device to the adapter for charging. The red light flashes while charging and will stop flashing when charging is complete. If the device indicator light flashes red while making the hydrogen water, it means the battery power is low and needs to be charged.
No Power
Please check if the USB cable and the adapter are correctly connected and whether the plug is plugged into the socket.
If the problem is not resolved, please ensure that the outlet is receiving power. Is the power outlet consistent with the products power specifications (DC 5V, 2.5A)?
Hydrogen Generator is not generating hydrogen bubbles
This can be caused by having the air outlet being too dry. Please add warm (not boiling) water and wait for 10-30 minutes and try again.
If the problem is not resolved, please email us at support@h2codeusa.com. DO NOT attempt to dismantle or fix the machine without authorization, as this could result in further damage.
Hydrogen generator is not generating hydrogen bubbles consistently
This can be caused by the accumulation of excessive minerals in the air outlet.
Please refer to the maintenance tab with directions on how to clean the hydrogen generator. The product brochure will also contain the necessary cleaning directions.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
